{"product_id":"diy-only-gate-frame-kit-6-x-6-includes-1x-2x1-side-post","title":"DIY GATE FRAME KIT ONLY 6' x 6' - BLACK","description":"\u003csection\u003e\nDIY Gate Frame Kit Only · 6′ × 6′ · Black\n\u003ch2\u003eA square 6×6 aluminum gate frame built for your custom infill.\u003c\/h2\u003e\n\u003cp\u003eThe DIY ONLY Gate Frame Kit 6′ × 6′ gives homeowners, contractors, and DIY builders a heavy-duty 6063-T6 aluminum gate structure with black powder coating, a 5″ side frame, heavy-duty hinges, and compatibility with 3\/4″ or 1″ profile infill.\u003c\/p\u003e\n\u003ca href=\"#\"\u003eAdd frame kit to cart ↑\u003c\/a\u003e\n\u003ca href=\"#agframe66-included\"\u003eSee what’s included ↓\u003c\/a\u003e\n6 FT\n6 FT\nFrame only · choose your infill\n\u003c\/section\u003e\nFrame size\u003cstrong\u003e6′ × 6′\u003c\/strong\u003e\nMaterial\u003cstrong\u003e6063-T6 aluminum\u003c\/strong\u003e\nSide frame\u003cstrong\u003e5″ heavy-duty\u003c\/strong\u003e\nProfile compatibility\u003cstrong\u003e3\/4″ or 1″\u003c\/strong\u003e\nFinish\u003cstrong\u003ePowder-coated black\u003c\/strong\u003e\n\u003csection\u003e\n\u003ch2\u003eHeavy-Duty DIY Aluminum Gate Frame\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eDIY Gate Frame Kit 6′ × 6′\u003c\/strong\u003e is built for strength, durability, and a modern appearance while keeping the final infill design flexible. The structural package gives you the aluminum gate perimeter, side components, hinges, and hardware needed to begin a custom 6×6 gate build.\u003c\/p\u003e\n\u003cp\u003eThe frame uses \u003cstrong\u003ehigh-quality 6063-T6 aluminum\u003c\/strong\u003e with a black powder-coated exterior finish for weather resistance. Aluminum is lightweight compared with steel, corrosion resistant, and non-combustible, making it practical for residential, coastal, humid, and wildfire-conscious material selection.\u003c\/p\u003e\n\u003cp\u003eThe kit works with compatible \u003cstrong\u003e3\/4-inch or 1-inch profile infill\u003c\/strong\u003e, allowing the finished gate to coordinate with aluminum fencing or a custom infill design.\u003c\/p\u003e\n\u003caside\u003e\n\u003ch3\u003e6×6 frame package\u003c\/h3\u003e\n\u003cp\u003eThe gate structure and listed hardware are included. \u003cstrong\u003eLock hardware and concrete footing are separate.\u003c\/strong\u003e Confirm the support condition and infill system before assembly.\u003c\/p\u003e\nFrame\u003cstrong\u003eIncluded\u003c\/strong\u003e\nSide post\u003cstrong\u003eIncluded\u003c\/strong\u003e\nHinges\u003cstrong\u003eIncluded\u003c\/strong\u003e\nLock hardware\u003cstrong\u003eSeparate\u003c\/strong\u003e\n\u003c\/aside\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nKey features\n\u003ch2\u003eA heavy-duty frame system designed to simplify the structural side of a custom gate.\u003c\/h2\u003e\n\u003carticle\u003e\u003cb\u003e01\u003c\/b\u003e\u003ch3\u003e5″ heavy-duty side frame\u003c\/h3\u003e\n\u003cp\u003eA wider aluminum side-frame member forms the main structural side of the gate assembly.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e02\u003c\/b\u003e\u003ch3\u003eTwo vertical frame members\u003c\/h3\u003e\n\u003cp\u003eThe pair of vertical aluminum members establishes the left and right sides of the 6×6 gate frame.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e03\u003c\/b\u003e\u003ch3\u003eTop \u0026amp; bottom frame\u003c\/h3\u003e\n\u003cp\u003eHorizontal frame sections complete the square gate perimeter and support the chosen infill layout.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e04\u003c\/b\u003e\u003ch3\u003eT stopper included\u003c\/h3\u003e\n\u003cp\u003eThe receiver-side stop component helps define the gate-closing condition.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e05\u003c\/b\u003e\u003ch3\u003eDouble-support hinges\u003c\/h3\u003e\n\u003cp\u003eOne heavy-duty hinge set provides the primary swing connection for the assembled frame.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e06\u003c\/b\u003e\u003ch3\u003eBlack powder coat\u003c\/h3\u003e\n\u003cp\u003eThe exterior finish gives the aluminum a clean modern appearance and weather-resistant surface.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e07\u003c\/b\u003e\u003ch3\u003e3\/4″ or 1″ infill\u003c\/h3\u003e\n\u003cp\u003eThe frame is designed around compatible 3\/4-inch or 1-inch profile infill systems.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e08\u003c\/b\u003e\u003ch3\u003eDIY-oriented assembly\u003c\/h3\u003e\n\u003cp\u003ePrecut parts, strong connectors, and supplied hardware allow assembly using standard tools.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nCustomizable infill\n\u003ch2\u003eKeep the frame. Choose the finished face that fits the project.\u003c\/h2\u003e\n\u003cp\u003eThe 6×6 frame-only format lets the builder coordinate the infill with the adjoining fence, privacy goals, airflow, and architectural style instead of being locked into one panel design.\u003c\/p\u003e\n\u003ca href=\"https:\/\/aluglobusfence.com\/contact\/\"\u003eAsk about compatible infill\u003c\/a\u003e\nConceptual 6×6 custom infill layout\n\u003c\/section\u003e\n\u003csection id=\"agframe66-included\"\u003e\nWhat’s included\n\u003ch2\u003eThe core frame, side-post, stop, and hinge components for the 6×6 gate build.\u003c\/h2\u003e\n\u003cp\u003eThe package supplies the structural aluminum gate-frame components and primary swing hardware while keeping lock hardware, concrete footing, and project-specific accessories separate.\u003c\/p\u003e\n\u003cstrong\u003eSide post included:\u003c\/strong\u003e the 6×6 kit includes one 2″ × 1″ side post. Confirm the final opening and mounting condition before installation.\n\u003cb\u003e01\u003c\/b\u003e\u003ch3\u003eTwo vertical gate-frame members\u003c\/h3\u003e\n\u003cp\u003eThe primary vertical aluminum members of the 6×6 gate structure.\u003c\/p\u003e\n\u003cb\u003e02\u003c\/b\u003e\u003ch3\u003eTop and bottom gate-frame sections\u003c\/h3\u003e\n\u003cp\u003eHorizontal frame components that complete the square gate perimeter.\u003c\/p\u003e\n\u003cb\u003e03\u003c\/b\u003e\u003ch3\u003e2″ × 1″ side-post configuration\u003c\/h3\u003e\n\u003cp\u003eThe side support identified in the 6×6 frame-kit configuration.\u003c\/p\u003e\n\u003cb\u003e04\u003c\/b\u003e\u003ch3\u003eL-shaped receiver \u0026amp; T stopper\u003c\/h3\u003e\n\u003cp\u003eReceiver-side components for the gate-closing condition.\u003c\/p\u003e\n\u003cb\u003e05\u003c\/b\u003e\u003ch3\u003eHeavy-duty double-support hinges\u003c\/h3\u003e\n\u003cp\u003eOne set of hinges for supporting and swinging the assembled gate frame.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nEasy DIY assembly\n\u003ch2\u003ePrecut parts and strong connectors keep the frame build organized.\u003c\/h2\u003e\n\u003cp\u003eThe kit is designed for do-it-yourself assembly with standard tools, but the finished result still depends on accurate opening measurements, a square frame, properly aligned hinges, and the correct support condition.\u003c\/p\u003e\n\u003ch3\u003eMeasure the opening\u003c\/h3\u003e\n\u003cp\u003eConfirm the finished 6×6 opening, side support conditions, swing path, grade, and required clearances.\u003c\/p\u003e\n\u003ch3\u003eLay out the frame components\u003c\/h3\u003e\n\u003cp\u003eOrganize the two vertical members, top and bottom frame sections, connectors, side-post components, stopper, and hardware.\u003c\/p\u003e\n\u003ch3\u003eAssemble the square frame\u003c\/h3\u003e\n\u003cp\u003eConnect the frame on a flat work surface and verify the corners and diagonal measurements before final tightening.\u003c\/p\u003e\n\u003ch3\u003eInstall the selected infill\u003c\/h3\u003e\n\u003cp\u003eFit the compatible 3\/4-inch or 1-inch profile infill using the fastening method intended for that material.\u003c\/p\u003e\n\u003ch3\u003eSet the hinges \u0026amp; side post\u003c\/h3\u003e\n\u003cp\u003eInstall the heavy-duty hinge set and receiver-side components according to the actual opening and support condition.\u003c\/p\u003e\n\u003ch3\u003eAlign \u0026amp; inspect\u003c\/h3\u003e\n\u003cp\u003eConfirm smooth swing, closing alignment, stopper contact, infill security, frame clearances, and all fasteners before use.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nIdeal applications\n\u003ch2\u003eA versatile frame for residential entries, side yards, backyard access, and custom fence integration.\u003c\/h2\u003e\n\u003carticle\u003e\u003ch3\u003eResidential entry gates\u003c\/h3\u003e\n\u003cp\u003eA square 6×6 frame format for appropriate residential access openings.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003ch3\u003eSide-yard access\u003c\/h3\u003e\n\u003cp\u003eBuild a custom gate that coordinates with the surrounding fence and property materials.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003ch3\u003eBackyard access\u003c\/h3\u003e\n\u003cp\u003eA customizable frame for wider residential walk-through and access conditions.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003ch3\u003eCustom fence integration\u003c\/h3\u003e\n\u003cp\u003eCoordinate compatible aluminum or custom infill with the adjoining fence system.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nMaterial \u0026amp; finish\n\u003ch2\u003e6063-T6 Aluminum with Black Powder Coating\u003c\/h2\u003e\n\u003cp\u003eThe frame is manufactured from \u003cstrong\u003e6063-T6 aluminum\u003c\/strong\u003e, a material used for precise architectural extrusions because it combines strength, manageable weight, corrosion resistance, and clean surface finishing.\u003c\/p\u003e\n\u003cp\u003eThe black powder-coated finish is designed for exterior weather exposure and gives the gate a clean, modern appearance. Aluminum is rust-proof in the sense that it does not form iron-oxide rust, and the powder coat adds another protective exterior layer.\u003c\/p\u003e\n\u003cp\u003eThe aluminum substrate is \u003cstrong\u003enon-combustible\u003c\/strong\u003e. That makes it useful for wildfire-conscious material selection, including Zone Zero projects, while complete compliance still depends on the full gate assembly, openings, placement, hardware, and local requirements.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nWhy choose the DIY gate frame kit\n\u003ch2\u003eA lower-complexity way to build a custom aluminum gate without giving up a coordinated structural frame.\u003c\/h2\u003e\n\u003carticle\u003e\u003cb\u003e01\u003c\/b\u003e\u003ch3\u003eLightweight yet strong\u003c\/h3\u003e\n\u003cp\u003eAluminum is easier to handle than many steel alternatives while providing a durable exterior gate structure.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e02\u003c\/b\u003e\u003ch3\u003eNon-combustible material\u003c\/h3\u003e\n\u003cp\u003eThe aluminum frame does not burn and can support wildfire-conscious exterior material selection.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e03\u003c\/b\u003e\u003ch3\u003eModern clean look\u003c\/h3\u003e\n\u003cp\u003eThe black frame integrates naturally with contemporary fences, panels, and property finishes.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e04\u003c\/b\u003e\u003ch3\u003eCustomizable design\u003c\/h3\u003e\n\u003cp\u003eChoose a compatible infill system rather than being locked into one gate-face style.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e05\u003c\/b\u003e\u003ch3\u003eDIY assembly\u003c\/h3\u003e\n\u003cp\u003eField assembly can reduce fabrication and installation complexity when the opening and hardware plan are prepared correctly.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e06\u003c\/b\u003e\u003ch3\u003eContractor-friendly supply\u003c\/h3\u003e\n\u003cp\u003eA repeatable frame package helps contractors coordinate multiple custom gate projects from a consistent starting point.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e07\u003c\/b\u003e\u003ch3\u003eCoastal-ready material direction\u003c\/h3\u003e\n\u003cp\u003eCorrosion-resistant aluminum and powder coating are well suited to humid and coastal exterior environments.\u003c\/p\u003e\u003c\/article\u003e\n\u003carticle\u003e\u003cb\u003e08\u003c\/b\u003e\u003ch3\u003eFlexible project planning\u003c\/h3\u003e\n\u003cp\u003eCoordinate the frame around the opening, infill, hardware, and adjoining fence rather than adapting a fixed finished gate.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nFrame specifications\n\u003ch2\u003eThe core details for the 6×6 black DIY gate-frame package.\u003c\/h2\u003e\n\u003cp\u003eThis configuration supplies the gate structure and listed side components while leaving the finished infill and project-specific access hardware to the builder.\u003c\/p\u003e\n\u003cstrong\u003eDesign boundary:\u003c\/strong\u003e no universal infill weight limit, wind-load rating, footing depth, lock configuration, or automation rating is stated for this frame. Confirm project-specific requirements before installation.\n\u003cdl\u003e\n\u003cdt\u003eProduct\u003c\/dt\u003e\n\u003cdd\u003eDIY Only Gate Frame Kit 6′ × 6′\u003c\/dd\u003e\n\u003cdt\u003eGate-frame size\u003c\/dt\u003e\n\u003cdd\u003e6 ft × 6 ft\u003c\/dd\u003e\n\u003cdt\u003eMaterial\u003c\/dt\u003e\n\u003cdd\u003e6063-T6 aluminum\u003c\/dd\u003e\n\u003cdt\u003eSide-frame width\u003c\/dt\u003e\n\u003cdd\u003e5″\u003c\/dd\u003e\n\u003cdt\u003eFinish\u003c\/dt\u003e\n\u003cdd\u003eBlack powder coated\u003c\/dd\u003e\n\u003cdt\u003eVertical frame members\u003c\/dt\u003e\n\u003cdd\u003eQuantity: 2\u003c\/dd\u003e\n\u003cdt\u003eHorizontal frame\u003c\/dt\u003e\n\u003cdd\u003eTop and bottom sections included\u003c\/dd\u003e\n\u003cdt\u003eSide post\u003c\/dt\u003e\n\u003cdd\u003eOne 2″ × 1″ side post included\u003c\/dd\u003e\n\u003cdt\u003eStop component\u003c\/dt\u003e\n\u003cdd\u003eT stopper included\u003c\/dd\u003e\n\u003cdt\u003eHinges\u003c\/dt\u003e\n\u003cdd\u003eOne set of heavy-duty double-support hinges\u003c\/dd\u003e\n\u003cdt\u003eCompatible infill\u003c\/dt\u003e\n\u003cdd\u003e3\/4″ or 1″ profile\u003c\/dd\u003e\n\u003cdt\u003eLock hardware\u003c\/dt\u003e\n\u003cdd\u003eNot included\u003c\/dd\u003e\n\u003cdt\u003eConcrete footing\u003c\/dt\u003e\n\u003cdd\u003eNot included\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nAluglobus video\n\u003ch2\u003eAdditional factory-direct aluminum-system and fabrication context.\u003c\/h2\u003e\n\u003cp\u003eSee more Aluglobus aluminum products, fabrication, and project-system details.\u003c\/p\u003e\n\u003cbutton type=\"button\" aria-label=\"Play Aluglobus aluminum systems video\"\u003e\n\u003cimg src=\"https:\/\/img.youtube.com\/vi\/XW_O-INjMrM\/maxresdefault.jpg\" alt=\"Aluglobus aluminum systems YouTube video thumbnail\" loading=\"lazy\"\u003e\n▶\n\u003c\/button\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nFrequently asked questions\n\u003ch2\u003ePlan the tools, infill, supports, finish, hardware, and finished opening before assembly.\u003c\/h2\u003e\n\u003cp\u003eThese answers cover the five core gate-frame questions plus included components, infill selection, non-combustible aluminum, measurements, and custom design.\u003c\/p\u003e\n\u003cdetails open\u003e\u003csummary\u003eWhat tools do I need to assemble this gate kit?\u003c\/summary\u003e\u003cp\u003eThe core gate-frame components are designed for straightforward field assembly. Standard hand tools such as a drill, wrench, tape measure, square, and level are typically used. No specialized fabrication equipment is required for the frame assembly.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this gate frame with my existing fence panels?\u003c\/summary\u003e\u003cp\u003eThe frame is compatible with 3\/4-inch or 1-inch profile infill. Existing panels or custom infill can work when their dimensions, weight, fastening method, and layout are appropriate for the 6×6 frame.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the aluminum frame durable for outdoor use?\u003c\/summary\u003e\u003cp\u003eYes. The frame is made from 6063-T6 aluminum and finished with black powder coating for exterior use. Aluminum is corrosion resistant and does not develop iron-oxide rust.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan this gate be installed by a DIYer?\u003c\/summary\u003e\u003cp\u003eYes. The kit is designed for DIY assembly using precut frame sections, strong connectors, the included side-post and T-stopper components, and heavy-duty hinges. Accurate opening measurements, squareness, hinge alignment, and safe handling are still important.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes this kit include lock hardware or posts for concrete footing?\u003c\/summary\u003e\u003cp\u003eLock hardware and concrete footing are not included. For a concrete installation, confirm the appropriate heavy-duty post or support upgrade before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is included with the 6×6 frame kit?\u003c\/summary\u003e\u003cp\u003eThe package includes two vertical gate-frame members, top and bottom gate-frame sections, the 2-inch by 1-inch side-post configuration identified for this product, the L-shaped receiver or side-post component with T stopper, one set of heavy-duty double-support hinges, and the black powder-coated aluminum frame components.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat infill can I use with the frame?\u003c\/summary\u003e\u003cp\u003eThe frame is intended for compatible 3\/4-inch or 1-inch profile infill. Depending on the complete design, that can include compatible aluminum profiles or another properly engineered infill material.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the aluminum non-combustible?\u003c\/summary\u003e\u003cp\u003eThe 6063-T6 aluminum frame material is non-combustible. Complete Zone Zero, wildfire, pool-barrier, or other code compliance depends on the full assembly, placement, openings, hardware, and local requirements.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat should I measure before ordering?\u003c\/summary\u003e\u003cp\u003eConfirm the finished opening width and height, wall or post conditions, hinge side, latch or stop condition, swing clearance, grade, selected infill thickness, and the complete support plan before ordering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the frame be used for a custom gate design?\u003c\/summary\u003e\u003cp\u003eYes. The frame-only format is specifically useful when the builder wants to choose the infill pattern and finished appearance while starting from a coordinated aluminum gate structure.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\nFactory-direct DIY gate frames\n\u003ch2\u003eStart with the 6×6 aluminum frame, then finish the gate around the project.\u003c\/h2\u003e\n\u003cp\u003eChoose the frame kit above or send Aluglobus the opening, infill idea, support condition, and hardware plan for help coordinating the complete gate-frame package.\u003c\/p\u003e\n\u003ca href=\"#\"\u003eAdd frame kit to cart ↑\u003c\/a\u003e\n\u003ca href=\"https:\/\/aluglobusfence.com\/contact\/\"\u003eRequest project support\u003c\/a\u003e\nAluglobus Aluminum Systems · DIY gate-frame kits · Factory-direct supply · Nationwide shipping\n\u003c\/section\u003e","brand":"Aluglobus fence","offers":[{"title":"Default Title","offer_id":71156401176829,"sku":null,"price":754.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/7102\/8221\/files\/DIY-Gate-Kit-Frame-Only-6x6-New.jpg?v=1786979389","url":"https:\/\/aluglobusaluminum.com\/products\/diy-only-gate-frame-kit-6-x-6-includes-1x-2x1-side-post","provider":"Aluglobus fence","version":"1.0","type":"link"}