{"product_id":"hd-pad-gate-plexiglass-4x6-door-no-plexiglass","title":"Alu Plexiglass HD PAD GATE plexiglass 4'x6' door (no plexiglass)","description":"\u003csection\u003e\n        Heavy-Duty Plexiglass-Ready Gate System\n        \u003ch2\u003e4×6 HD PAD GATE. Heavy-duty aluminum frame, Plexiglass not included.\u003c\/h2\u003e\n        \u003cp\u003eThis pedestrian single-swing gate package is built around a 6063-T6 aluminum Heavy-Duty frame and hardware set, giving contractors and project owners a strong architectural base while keeping the final infill choice open.\u003c\/p\u003e\n          Nominal 4 ft × 6 ftHeavy-DutySingle Swing6063-T6 AluminumPlexiglass Not Included\n          \u003ca href=\"https:\/\/aluglobusfence.com\/shop\/gates\/hd-pad-gate-plexiglass-4x6-door-no-plexiglass\/#main-container\"\u003eGo to product options\u003c\/a\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/contacts\/\"\u003eReview my opening\u003c\/a\u003e\n        Heavy-Duty aluminum gate frame, buyer-selected infill\n\u003c\/section\u003e\n  \u003cb\u003eConfiguration\u003c\/b\u003ePedestrian single swing\n  \u003cb\u003eNominal Size\u003c\/b\u003e4 ft × 6 ft\n  \u003cb\u003eFrame\u003c\/b\u003e6063-T6 aluminum\n  \u003cb\u003eInfill\u003c\/b\u003eNot included\n  \u003cb\u003eSystem\u003c\/b\u003eHD PAD GATE\n\u003csection\u003e\n    Product Overview\n    \u003ch2\u003eA Heavy-Duty gate frame for projects that need infill flexibility.\u003c\/h2\u003e\n    \u003cp\u003eThe HD PAD GATE Plexiglass 4×6 package is designed as a robust aluminum pedestrian gate framework ready for a separately selected Plexiglass or compatible infill. The key purchasing point is simple: this specific kit does not include the Plexiglass panel.\u003c\/p\u003e\n      1\u003ch3\u003eHeavy-Duty frame\u003c\/h3\u003e\n\u003cp\u003eThe current listing uses 4-inch Heavy-Duty gate frame stock and 6-inch Heavy-Duty hinges rather than a Universal DIY wall-to-wall frame package.\u003c\/p\u003e\n      2\u003ch3\u003eChoose the infill\u003c\/h3\u003e\n\u003cp\u003eBecause the panel is not included, the final acrylic or other infill can be selected around the project’s transparency, privacy, appearance, and code requirements.\u003c\/p\u003e\n      3\u003ch3\u003eContractor-ready planning\u003c\/h3\u003e\n\u003cp\u003eHinge-side support, post selection, clearances, latch location, and final infill retention should be reviewed before field fabrication.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    Benefits\n    \u003ch2\u003eWhy this 4×6 frame system works for architectural pedestrian entries.\u003c\/h2\u003e\n        \u003cul\u003e\n          \u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant aluminum:\u003c\/strong\u003e suited to exterior projects where rust from ordinary steel can become a maintenance issue.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eHeavy-Duty framing:\u003c\/strong\u003e the gate package is built around the HD PAD GATE framing concept, not a lightweight decorative panel.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eFlexible appearance:\u003c\/strong\u003e the open frame lets the project team choose the final Plexiglass or other compatible infill separately.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eLow-maintenance frame:\u003c\/strong\u003e the powder-coated aluminum frame does not require wood-style staining or routine repainting.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eFactory-direct system:\u003c\/strong\u003e designed for contractors, builders, designers, and serious residential projects.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003ch3\u003eA frame-first gate matters.\u003c\/h3\u003e\n        \u003cp\u003eA pedestrian gate is a moving assembly. The frame carries hinge loads, keeps the leaf square, and gives the infill a controlled perimeter. Final performance still depends on the opening, support condition, fabrication, hardware, and installation.\u003c\/p\u003e\n        \u003cstrong\u003eA gate without a frame is just a fence with hinges.\u003c\/strong\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    Applications\n    \u003ch2\u003eBuilt for pedestrian openings where structure and design both matter.\u003c\/h2\u003e\n      \u003ch3\u003eSide-yard entries\u003c\/h3\u003e\n\u003cp\u003eFor residential passages that need a substantial framed gate and a clean architectural look.\u003c\/p\u003e\n      \u003ch3\u003eFront walk gates\u003c\/h3\u003e\n\u003cp\u003eFor pedestrian entrances where a transparent, frosted, tinted, or custom infill may be selected later.\u003c\/p\u003e\n      \u003ch3\u003eMulti-family + light commercial\u003c\/h3\u003e\n\u003cp\u003eUseful where repeated, coordinated gate styling and contractor-grade planning are important.\u003c\/p\u003e\n    \u003cstrong\u003ePool-barrier note:\u003c\/strong\u003e Do not assume that visibility alone makes a gate pool compliant. Height, opening limitations, latch location, self-closing behavior, climbability, and local code requirements must be reviewed for the complete installed assembly.\n\u003c\/section\u003e\n\u003csection\u003e\n    Design \u0026amp; Durability\n    \u003ch2\u003e6063-T6 aluminum frame, Heavy-Duty hardware concept, buyer-selected infill.\u003c\/h2\u003e\n    \u003cp\u003eThe frame is the structural starting point. The current product description identifies 6063-T6 aluminum and a powder-coated exterior finish, while the kit itself is intentionally sold without the Plexiglass panel.\u003c\/p\u003e\n      01\u003cb\u003e20′ 4″ HD gate frame stock\u003c\/b\u003eFabrication stock for the Heavy-Duty gate frame. The 20 ft length is not the finished installed gate dimension.\n      02\u003cb\u003eInner corner bracket\u003c\/b\u003eUsed to reinforce frame corner connections.\n      03\u003cb\u003eChannel kit\u003c\/b\u003eSupports the project’s infill-retention strategy.\n      04\u003cb\u003e3″ aluminum cap\u003c\/b\u003eListed component for the gate package.\n      05\u003cb\u003e6″ HD hinges\u003c\/b\u003eHeavy-Duty hinge hardware listed for the gate.\n      06\u003cb\u003e6′ L-shape gate stopper\u003c\/b\u003eClosure\/stop component listed with the system.\n      07\u003cb\u003eFasteners\u003c\/b\u003e#10×1″, #12×2″ black, and #10×3\/4″ screws are listed on the product page.\n      08\u003cb\u003e6′ top rail + post options\u003c\/b\u003eThe listing includes a 6 ft top rail and identifies multiple post options. Confirm the selected support package before fabrication.\n    \u003cstrong\u003ePlexiglass is not part of this SKU.\u003c\/strong\u003e Confirm panel material, thickness, edge clearance, expansion allowance, retention method, and finish before ordering the separate infill.\n\u003c\/section\u003e\n\u003csection\u003e\n    Gate System Video\n    \u003ch2\u003eSee how Aluglobus approaches framed aluminum gate systems.\u003c\/h2\u003e\n    \u003cp\u003eUse the video as system context, then match the opening, support, hardware, and infill requirements to this specific Heavy-Duty 4×6 package.\u003c\/p\u003e\n    \u003ciframe loading=\"lazy\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/XW_O-INjMrM?rel=0\" title=\"Aluglobus aluminum gate system video\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    Material + Infill Planning\n    \u003ch2\u003eThe aluminum frame and the final infill are two different material decisions.\u003c\/h2\u003e\n      \u003ctable\u003e\n        \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eWhat to know\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n        \u003ctbody\u003e\n          \u003ctr\u003e\n\u003ctd\u003eAluminum frame\u003c\/td\u003e\n\u003ctd\u003e6063-T6 aluminum is identified for the gate frame. Aluminum is corrosion resistant and the metal substrate is non-combustible.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003ctd\u003ePowder-coated finish\u003c\/td\u003e\n\u003ctd\u003eThe product description identifies a powder-coated exterior finish. Clean with mild soap and water and avoid abrasive methods that can damage the coating.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003ctd\u003ePlexiglass \/ acrylic\u003c\/td\u003e\n\u003ctd\u003eNot included. Acrylic is a polymer and is not equivalent to a non-combustible aluminum infill.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003ctd\u003eAlternative infill\u003c\/td\u003e\n\u003ctd\u003eAny substitute panel needs compatible thickness, edge clearance, retention, wind-load, and site-condition review before installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003ctd\u003eWildfire \/ Zone Zero\u003c\/td\u003e\n\u003ctd\u003eThe aluminum frame can support a non-combustible material strategy, but compliance must be evaluated for the complete finished gate, including the selected infill, coatings, hardware, clearances, adjacent materials, and local AHJ requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003c\/tbody\u003e\n      \u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n    Installation \u0026amp; Buying Guide\n    \u003ch2\u003eMeasure first. Confirm support. Then fabricate the Heavy-Duty leaf.\u003c\/h2\u003e\n      \u003cb\u003e1. Measure\u003c\/b\u003eRecord the finished opening width, target gate height, and required operating clearances.\n      \u003cb\u003e2. Confirm support\u003c\/b\u003eIdentify the hinge-side wall, post, column, or upgraded support condition before loading it with the gate leaf.\n      \u003cb\u003e3. Plan the infill\u003c\/b\u003eSelect the panel material and thickness before finalizing channels, retention, and clearances.\n      \u003cb\u003e4. Assemble square\u003c\/b\u003eFabricate on a flat surface and verify diagonals before hanging the gate.\n      \u003cb\u003e5. Hang + adjust\u003c\/b\u003eSet hinge alignment, stopper, latch\/lock hardware, and final swing clearance.\n    \u003cstrong\u003eAutomation:\u003c\/strong\u003e do not add an operator by assumption. Gate weight, hinge loads, stops, support, operator geometry, and access-control requirements need a separate review.\n\u003c\/section\u003e\n\u003csection\u003e\n    Frequently Asked Questions\n    \u003ch2\u003eWhat to confirm before ordering the 4×6 HD Plexiglass-ready gate.\u003c\/h2\u003e\n      \u003cdetails\u003e\u003csummary\u003eIs the 4×6 size a finished opening size?\u003c\/summary\u003eThe product is sold as a nominal 4 ft × 6 ft pedestrian gate kit. Finished opening dimensions, hinge-side support, swing clearance, and hardware clearances should be confirmed before fabrication or installation.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes this kit include Plexiglass?\u003c\/summary\u003eNo. This Heavy-Duty 4×6 listing is supplied without the Plexiglass infill. The aluminum gate frame and listed gate components are provided so the project can use a separately selected compatible infill.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat material is the gate frame made from?\u003c\/summary\u003eThe product description identifies the gate frame as 6063-T6 aluminum. Aluminum provides corrosion resistance and a strong strength-to-weight ratio for exterior gate applications.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat parts are listed with this Heavy-Duty gate kit?\u003c\/summary\u003eThe current product listing names 20 ft of 4-inch Heavy-Duty gate frame stock, inner corner bracket, channel kit, 3-inch aluminum cap, 6-inch Heavy-Duty hinges, 6 ft L-shape gate stopper, listed screw sizes, a 6 ft top rail, and post options. Confirm exact quantities and selected post configuration before cutting or installation.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I add clear, frosted, or tinted Plexiglass later?\u003c\/summary\u003eThe gate is designed as a Plexiglass-ready frame system, but the infill is not included. Panel material, thickness, edge treatment, retention method, and clearances should be confirmed for the final project before ordering the infill.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs this the same as the Universal DIY Plexiglass gate?\u003c\/summary\u003eNo. This is the Heavy-Duty HD PAD GATE configuration. It uses the Heavy-Duty framing and hardware concept shown on the current product listing and should not be treated as the Universal DIY wall-to-wall frame package.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan this gate be automated?\u003c\/summary\u003eAutomation is not assumed. Operator loads, hinge configuration, gate weight, support conditions, stops, access-control hardware, and local requirements need a separate project-specific review before adding an operator.\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eIs the complete finished gate non-combustible?\u003c\/summary\u003eThe supplied aluminum frame is a non-combustible metal substrate. The final gate assembly depends on the infill you add. If acrylic or another polymer infill is installed, the complete assembly should not be represented as an all-aluminum non-combustible gate. Local wildfire, pool, egress, and building requirements must be checked for the finished installation.\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n        Project Checkpoint\n        \u003ch2\u003eBefore ordering the HD frame, confirm the opening, support, swing, and infill plan.\u003c\/h2\u003e\n        \u003cul\u003e\n          \u003cli\u003eFinished opening width + height\u003c\/li\u003e\n          \u003cli\u003eHinge-side support condition\u003c\/li\u003e\n          \u003cli\u003eSwing direction + full clearance\u003c\/li\u003e\n          \u003cli\u003eLatch \/ lock requirements\u003c\/li\u003e\n          \u003cli\u003eSelected infill material + thickness\u003c\/li\u003e\n          \u003cli\u003ePhotos from both sides\u003c\/li\u003e\n          \u003cli\u003eProject city \/ state\u003c\/li\u003e\n          \u003cli\u003ePool, wildfire, or other code considerations\u003c\/li\u003e\n        \u003c\/ul\u003e\n        Choose your next step\n        \u003ch3\u003eHave the opening reviewed, or return to the exact Heavy-Duty 4×6 product options.\u003c\/h3\u003e\n        \u003cp\u003eFor custom panels, unusual walls or posts, pool-barrier projects, wildfire-focused projects, or future automation, send the site information before fabrication.\u003c\/p\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/contacts\/\"\u003eReview my opening\u003c\/a\u003e\n          \u003ca href=\"https:\/\/aluglobusfence.com\/shop\/gates\/hd-pad-gate-plexiglass-4x6-door-no-plexiglass\/#main-container\"\u003eGo to product options\u003c\/a\u003e\n        Call (888) 876-3006\n\u003c\/section\u003e","brand":"Aluglobus fence","offers":[{"title":"Default Title","offer_id":71156404879613,"sku":null,"price":1764.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/7102\/8221\/files\/Untitled-design-41_e4f0f570-df2f-4bfd-a9b9-10eade0cf696.png?v=1786979487","url":"https:\/\/aluglobusaluminum.com\/products\/hd-pad-gate-plexiglass-4x6-door-no-plexiglass","provider":"Aluglobus fence","version":"1.0","type":"link"}