Aluglobus Aluminum Systems
ALU 40 Black 4x6 ft. Universal DIY Pedestrian Gate Kit - Single Swing - GAP 3/8" or 1/2"
ALU 40 Black 4x6 ft. Universal DIY Pedestrian Gate Kit - Single Swing - GAP 3/8" or 1/2"
The ALU40 Black 4×6 Universal DIY Pedestrian Gate Kit is a complete single-swing aluminum gate system designed for homeowners, contractors, builders, and installers who want a clean architectural gate without sourcing the frame, slats, hinge, and supporting components separately.
- Pedestrian Gates
Couldn't load pickup availability
The ALU40 Black 4×6 Universal DIY Pedestrian Gate Kit is a complete single-swing aluminum gate system designed for homeowners, contractors, builders, and installers who want a clean architectural gate without sourcing the frame, slats, hinge, and supporting components separately.
ALU40 · Universal DIY pedestrian gate
A 4′ high × 6′ wide aluminum gate built for clean DIY assembly.
The ALU40 Universal DIY Gate Kit combines a pre-engineered single-swing frame with 4-inch horizontal ALU40 slats, 6063-T6 aluminum and a black architectural powder-coated finish. It is designed for homeowners, contractors and builders who want a modern pedestrian gate without welded field fabrication.
ALU 40 black slat pedestrian gate project
Aluglobus Universal DIY Gate System
Key Features
The ALU40 profile uses wider 4-inch horizontal aluminum slats for a stronger, more substantial appearance with fewer visual lines across the gate. Choose between a 3/8-inch or 1/2-inch gap to control the balance between airflow, privacy, and architectural appearance.
- DIY-friendly assembly designed for faster and simpler installation
- Designed specifically for wall-to-wall pedestrian gate applications
- Universal aluminum frame compatible with ALU40 gate configurations
- Fully engineered frame system for improved strength and stability
- Available within the 4×6, 6×6, and 6×8 Universal DIY gate family
- 6063-T6 architectural aluminum construction
- Aluminum construction will not rust like conventional steel
- Designed for coastal, humid, and demanding exterior environments
- Wide lock-side frame designed for common US-size gate hardware
- Non-combustible aluminum material construction
- Modern 4-inch horizontal ALU40 slat design
- Available with 3/8″ or 1/2″ spacing between slats
Why ALU40: the wider 4-inch slat profile creates a cleaner architectural look with fewer horizontal lines than narrower slat systems while maintaining the durability and low-maintenance benefits of aluminum.
The ALU40 Universal DIY system
See the gate system, frame, finish and hardware from the actual product page.
Explore the Universal DIY frame concept, ALU40 slat compatibility, powder-coated finish, hinge support and aluminum construction used for this 4×6 gate.
Built for DIY
A factory-engineered gate platform that removes the welding step.
The Universal DIY system is designed around straightforward assembly, a fully engineered aluminum frame and exterior-grade components that can be coordinated with common U.S.-size gate lock hardware.
Built for DIY - Installed in Minutes
The frame is designed to assemble cleanly without field welding or fabrication.
One System. Endless Compatibility
The Universal DIY platform supports ALU40 gate layouts and common lock setups while maintaining a consistent architectural look.
Engineered for Strength & Durability
6063-T6 aluminum and AAMA 2604 architectural powder coating create a rust-free, weather-ready material platform.
Product specifications
The ALU40 4×6 Universal DIY gate at a glance.
This SKU is a black, single-swing pedestrian gate measuring 4 feet high by 6 feet wide with selectable 3/8-inch or 1/2-inch horizontal slat gaps.
Important installation note: The standard Universal DIY configuration is designed for wall-to-wall installation. A concrete-footing application requires an HD post upgrade and should be specified before ordering.
| Product | ALU40 Black Universal DIY Pedestrian Gate Kit |
|---|---|
| Gate type | Single-swing pedestrian gate |
| Finished size | 4′ high × 6′ wide |
| Slat system | ALU40 horizontal aluminum slats |
| Slat profile | ALU40 · 4″ |
| ALU40 slats | 8 included |
| Gap options | 3/8″ or 1/2″ |
| Material | USA-made 6063-T6 aluminum |
| Finish | Architectural powder coating |
| Coating standard | AAMA 2604 |
| Paint brands | Cardinal Paint / TIGER |
| Standard color | Black |
| Custom colors | Available upon request |
| Combustibility | Non-combustible aluminum |
| Ignition behavior | Does not burn under normal fire conditions |
| Melting point | Approximately 615-655 °C |
| Smoke developed | 0, as listed in the product material specification |
| Installation | Wall-to-wall installation only |
| DIY skill level | Intermediate |
| Origin | Made in the USA |
Wall-to-wall application: this Universal DIY frame is intended for installation between appropriate structural mounting surfaces. Verify the finished opening, hinge orientation, mounting structure, lock hardware, slat spacing, clearances, and site conditions before assembly.
ALU 40 black slat pedestrian gate project
What’s included
The frame, hinge and ALU40 slats for the 4×6 configuration.
This 4×6 configuration includes the core gate frame, hinge and slat components below. Posts and certain access hardware depend on the installation and can be selected separately.
Universal DIY gate frame
Complete pre-engineered aluminum gate frame sized for the 4-foot-high by 6-foot-wide single-swing configuration.
Wide lock side frame
The wide side profile is designed to coordinate with most U.S.-size lock hardware selected for the project.
Top and bottom frame
Coordinated top and bottom frame components complete the fully DIY frame design.
Gate T-stopper
The gate-side stopper component is included as part of the Universal DIY frame system.
Receiver L-stopper side post
The receiver-side L-stopper component helps finish the closing side of the gate opening.
5″ HD support hinge
One heavy-duty support hinge is listed with the kit. A hydraulic spring is sold separately when a true self-closing function is required.
8 ALU40 slats
Eight 4-inch × 6-foot ALU40 aluminum slats are included for the 4×6 configuration in super-durable powder-coated black.
Assembly-ready system
The kit is designed around no-weld assembly, with the frame and components prepared for an intermediate DIY or contractor installation.
Not included: concrete footing, lock hardware, hydraulic self-closing spring and installation tools are not included in the standard kit.
Why ALU40 Universal DIY
A modern horizontal gate without the fabrication workflow.
DIY installation
Pre-engineered components eliminate the need to weld the gate frame in the field.
Horizontal ALU40 design
Four-inch aluminum slats create the clean horizontal rhythm associated with modern residential and light-commercial architecture.
Adjustable privacy
Choose the specified 3/8-inch or 1/2-inch gap to balance visual screening, airflow and the desired architectural expression.
Rust-free aluminum
6063-T6 aluminum avoids the iron-oxide rust cycle associated with ferrous gate materials.
Exterior-ready finish
AAMA 2604 architectural powder coating is used for long-term exterior color and finish performance.
Factory-direct support
Aluglobus Aluminum Systems supplies the gate system directly and can help contractors or serious DIY customers confirm the correct project package.
More ALU40 product views
Additional ALU40 Universal DIY gate views.
Use these additional views to study the gate system, component relationships and finished appearance before planning the installation.
Technical references
Profile and assembly references included with this product. Use the profile and assembly diagrams below to review component geometry and installation relationships.
Recommended applications
Designed for modern pedestrian openings and coordinated aluminum projects.
Residential gates
A clean single-swing access gate for side yards, courtyards and residential pedestrian openings.
Privacy fencing layouts
ALU40 horizontal slats can coordinate the gate visually with modern aluminum fence systems.
Courtyards and entryways
The 6-foot-wide opening gives a broad pedestrian entry while the 4-foot height keeps the gate visually open.
Coastal properties
Aluminum and architectural powder coating are well suited to humid and salt-air environments with appropriate routine cleaning.
Light commercial access
The gate can serve controlled pedestrian openings where a clean, low-maintenance aluminum system is preferred.
Contractor-led DIY installs
The no-weld system can simplify projects where a contractor handles site anchoring and alignment while using factory-prepared gate components.
ALU 40 black slat pedestrian gate project
Material and finish
Architectural aluminum without the rust cycle.
The ALU40 gate uses 6063-T6 aluminum with an architectural powder-coated finish. Aluminum does not develop iron-oxide rust, and the black finish is already applied before installation, so no field painting is required.
6063-T6 aluminum
Strong, lightweight and corrosion-resistant for exterior gate applications.
AAMA 2604 finish
Architectural powder-coating standard listed for this product.
Black standard color
The gate arrives powder coated, with custom colors available upon request.
Non-combustible substrate
The aluminum substrate is non-combustible. Project-specific code compliance depends on the complete installed assembly and local requirements.
Installation sequence
The six-step workflow carried over from the product instructions.
Preparation
Organize all materials in a clean workspace to avoid damage or misplacement.
Frame assembly
Connect the universal gate frame with stainless-steel screws, keeping all corners square and secure.
Slat installation
Cut and insert the ALU40 slats into the frame grooves, establish the selected spacing and secure each slat with the provided stainless-steel screws.
Hinge installation
Attach the heavy-duty hinge hardware to the side post and frame, then verify alignment for smooth swing operation.
Post and gap cover installation
Attach the side posts and gap-cover components to finish the wall-to-wall opening cleanly.
Final touches
Press flat caps onto the posts, inspect the connections, confirm clearances and clean the aluminum surfaces.
Plan before ordering: confirm the opening, mounting condition, swing and hardware first.
Verify 4′ high × 6′ wide
Measure the finished opening and confirm that this 4-foot-high by 6-foot-wide configuration matches the intended site.
Confirm wall-to-wall mounting
The standard Universal DIY configuration is wall-to-wall only. Concrete footing requires an HD post upgrade requested in advance.
Choose 3/8″ or 1/2″ gap
Select the slat spacing that gives the desired balance of privacy and openness before final assembly.
Plan the lock
Lock hardware is not included. Confirm the selected latch or lock body and clearances for the wide lock-side frame.
Plan self-closing hardware
The included support hinge is self-closing capable, but a true self-closing setup requires the separate hydraulic spring specified for the project.
Check swing clearance
Confirm the gate has unobstructed room to swing and that the mounting surfaces are aligned, rigid and suitable for the selected anchors.
Product videos
See the Universal DIY gate system and Aluglobus gate construction in motion.
A 4′ high × 6′ wide ALU40 gate for customers who want to assemble, not fabricate.
Confirm the wall-to-wall opening, gap option, swing direction, mounting condition and lock requirements before ordering. For concrete-footing conditions or nonstandard projects, contact Aluglobus Aluminum Systems for the correct post and gate configuration.
Frequently asked questions
Answers before you assemble the ALU40 gate.
Review common questions about DIY assembly, gate sizing, finish, kit contents, mounting conditions and exterior use.
Can I install the ALU40 Universal DIY 4′ × 6′ Gate Kit BLACK by myself?
Yes. The kit is designed for DIY users. Components are pre-sized and engineered for straightforward assembly with no welding required.
Is the gate frame already sized or do I need to cut anything?
The gate frame comes pre-sized for the 4×6 configuration, so the frame itself does not require cutting. Follow the supplied slat and assembly instructions for the infill.
Can one person install the gate, or do I need assistance?
One person can assemble the frame, but an extra helper is useful during leveling and mounting so the gate can be positioned more quickly and precisely.
Do I need to paint or coat the gate after installation?
No. The black finish is already powder coated for durability, corrosion resistance and long-term color performance.
What exactly is included in this 4×6 kit?
This 4×6 configuration includes the Universal DIY frame, wide lock side, top and bottom frame, T-stopper, receiver L-stopper side post, one 5-inch HD support hinge and eight 4-inch × 6-foot ALU40 slats.
Can this gate be installed with posts set in concrete?
The standard specification is wall-to-wall only. The product page states that a concrete-footing installation requires an HD post upgrade that must be requested.
Does the kit include the lock or self-closing spring?
No. Lock hardware and the hydraulic self-closing spring are listed as not included. Select those parts based on the access-control and self-closing requirements of the project.
Is the aluminum gate suitable for coastal or humid climates?
Yes. The product is specifically listed for coastal, humid and harsh climates. Routine cleaning is still recommended where salt or environmental deposits accumulate.
Reference
Product views & drawings
Show 2 product views and drawings
Aluglobus Aluminum Systems
Send the opening dimensions and photos. Confirm the right ALU40 DIY package before ordering.
Factory-direct aluminum gate systems for homeowners, contractors, builders, designers and serious DIY projects. Nationwide shipping and product support are available.
- Aluminum gates
- Fence systems
- Patio covers
- Wall cladding
- Nationwide supply