A square 6×6 aluminum gate frame built for your custom infill.
The DIY ONLY Gate Frame Kit 6′ × 6′ gives homeowners, contractors, and DIY builders a heavy-duty 6063-T6 aluminum gate structure with black powder coating, a 5″ side frame, heavy-duty hinges, and compatibility with 3/4″ or 1″ profile infill.
Add frame kit to cart ↑ See what’s included ↓ 6 FT 6 FT Frame only · choose your infillHeavy-Duty DIY Aluminum Gate Frame
The DIY Gate Frame Kit 6′ × 6′ is built for strength, durability, and a modern appearance while keeping the final infill design flexible. The structural package gives you the aluminum gate perimeter, side components, hinges, and hardware needed to begin a custom 6×6 gate build.
The frame uses high-quality 6063-T6 aluminum with a black powder-coated exterior finish for weather resistance. Aluminum is lightweight compared with steel, corrosion resistant, and non-combustible, making it practical for residential, coastal, humid, and wildfire-conscious material selection.
The kit works with compatible 3/4-inch or 1-inch profile infill, allowing the finished gate to coordinate with aluminum fencing or a custom infill design.
A heavy-duty frame system designed to simplify the structural side of a custom gate.
5″ heavy-duty side frame
A wider aluminum side-frame member forms the main structural side of the gate assembly.
Two vertical frame members
The pair of vertical aluminum members establishes the left and right sides of the 6×6 gate frame.
Top & bottom frame
Horizontal frame sections complete the square gate perimeter and support the chosen infill layout.
T stopper included
The receiver-side stop component helps define the gate-closing condition.
Double-support hinges
One heavy-duty hinge set provides the primary swing connection for the assembled frame.
Black powder coat
The exterior finish gives the aluminum a clean modern appearance and weather-resistant surface.
3/4″ or 1″ infill
The frame is designed around compatible 3/4-inch or 1-inch profile infill systems.
DIY-oriented assembly
Precut parts, strong connectors, and supplied hardware allow assembly using standard tools.
Keep the frame. Choose the finished face that fits the project.
The 6×6 frame-only format lets the builder coordinate the infill with the adjoining fence, privacy goals, airflow, and architectural style instead of being locked into one panel design.
Ask about compatible infill Conceptual 6×6 custom infill layoutThe core frame, side-post, stop, and hinge components for the 6×6 gate build.
The package supplies the structural aluminum gate-frame components and primary swing hardware while keeping lock hardware, concrete footing, and project-specific accessories separate.
Side post included: the 6×6 kit includes one 2″ × 1″ side post. Confirm the final opening and mounting condition before installation. 01Two vertical gate-frame members
The primary vertical aluminum members of the 6×6 gate structure.
02Top and bottom gate-frame sections
Horizontal frame components that complete the square gate perimeter.
032″ × 1″ side-post configuration
The side support identified in the 6×6 frame-kit configuration.
04L-shaped receiver & T stopper
Receiver-side components for the gate-closing condition.
05Heavy-duty double-support hinges
One set of hinges for supporting and swinging the assembled gate frame.
Precut parts and strong connectors keep the frame build organized.
The kit is designed for do-it-yourself assembly with standard tools, but the finished result still depends on accurate opening measurements, a square frame, properly aligned hinges, and the correct support condition.
Measure the opening
Confirm the finished 6×6 opening, side support conditions, swing path, grade, and required clearances.
Lay out the frame components
Organize the two vertical members, top and bottom frame sections, connectors, side-post components, stopper, and hardware.
Assemble the square frame
Connect the frame on a flat work surface and verify the corners and diagonal measurements before final tightening.
Install the selected infill
Fit the compatible 3/4-inch or 1-inch profile infill using the fastening method intended for that material.
Set the hinges & side post
Install the heavy-duty hinge set and receiver-side components according to the actual opening and support condition.
Align & inspect
Confirm smooth swing, closing alignment, stopper contact, infill security, frame clearances, and all fasteners before use.
A versatile frame for residential entries, side yards, backyard access, and custom fence integration.
Residential entry gates
A square 6×6 frame format for appropriate residential access openings.
Side-yard access
Build a custom gate that coordinates with the surrounding fence and property materials.
Backyard access
A customizable frame for wider residential walk-through and access conditions.
Custom fence integration
Coordinate compatible aluminum or custom infill with the adjoining fence system.
6063-T6 Aluminum with Black Powder Coating
The frame is manufactured from 6063-T6 aluminum, a material used for precise architectural extrusions because it combines strength, manageable weight, corrosion resistance, and clean surface finishing.
The black powder-coated finish is designed for exterior weather exposure and gives the gate a clean, modern appearance. Aluminum is rust-proof in the sense that it does not form iron-oxide rust, and the powder coat adds another protective exterior layer.
The aluminum substrate is non-combustible. That makes it useful for wildfire-conscious material selection, including Zone Zero projects, while complete compliance still depends on the full gate assembly, openings, placement, hardware, and local requirements.
A lower-complexity way to build a custom aluminum gate without giving up a coordinated structural frame.
Lightweight yet strong
Aluminum is easier to handle than many steel alternatives while providing a durable exterior gate structure.
Non-combustible material
The aluminum frame does not burn and can support wildfire-conscious exterior material selection.
Modern clean look
The black frame integrates naturally with contemporary fences, panels, and property finishes.
Customizable design
Choose a compatible infill system rather than being locked into one gate-face style.
DIY assembly
Field assembly can reduce fabrication and installation complexity when the opening and hardware plan are prepared correctly.
Contractor-friendly supply
A repeatable frame package helps contractors coordinate multiple custom gate projects from a consistent starting point.
Coastal-ready material direction
Corrosion-resistant aluminum and powder coating are well suited to humid and coastal exterior environments.
Flexible project planning
Coordinate the frame around the opening, infill, hardware, and adjoining fence rather than adapting a fixed finished gate.
The core details for the 6×6 black DIY gate-frame package.
This configuration supplies the gate structure and listed side components while leaving the finished infill and project-specific access hardware to the builder.
Design boundary: no universal infill weight limit, wind-load rating, footing depth, lock configuration, or automation rating is stated for this frame. Confirm project-specific requirements before installation.- Product
- DIY Only Gate Frame Kit 6′ × 6′
- Gate-frame size
- 6 ft × 6 ft
- Material
- 6063-T6 aluminum
- Side-frame width
- 5″
- Finish
- Black powder coated
- Vertical frame members
- Quantity: 2
- Horizontal frame
- Top and bottom sections included
- Side post
- One 2″ × 1″ side post included
- Stop component
- T stopper included
- Hinges
- One set of heavy-duty double-support hinges
- Compatible infill
- 3/4″ or 1″ profile
- Lock hardware
- Not included
- Concrete footing
- Not included
Additional factory-direct aluminum-system and fabrication context.
See more Aluglobus aluminum products, fabrication, and project-system details.
Plan the tools, infill, supports, finish, hardware, and finished opening before assembly.
These answers cover the five core gate-frame questions plus included components, infill selection, non-combustible aluminum, measurements, and custom design.
What tools do I need to assemble this gate kit?
The core gate-frame components are designed for straightforward field assembly. Standard hand tools such as a drill, wrench, tape measure, square, and level are typically used. No specialized fabrication equipment is required for the frame assembly.
Can I use this gate frame with my existing fence panels?
The frame is compatible with 3/4-inch or 1-inch profile infill. Existing panels or custom infill can work when their dimensions, weight, fastening method, and layout are appropriate for the 6×6 frame.
Is the aluminum frame durable for outdoor use?
Yes. The frame is made from 6063-T6 aluminum and finished with black powder coating for exterior use. Aluminum is corrosion resistant and does not develop iron-oxide rust.
Can this gate be installed by a DIYer?
Yes. The kit is designed for DIY assembly using precut frame sections, strong connectors, the included side-post and T-stopper components, and heavy-duty hinges. Accurate opening measurements, squareness, hinge alignment, and safe handling are still important.
Does this kit include lock hardware or posts for concrete footing?
Lock hardware and concrete footing are not included. For a concrete installation, confirm the appropriate heavy-duty post or support upgrade before ordering.
What is included with the 6×6 frame kit?
The package includes two vertical gate-frame members, top and bottom gate-frame sections, the 2-inch by 1-inch side-post configuration identified for this product, the L-shaped receiver or side-post component with T stopper, one set of heavy-duty double-support hinges, and the black powder-coated aluminum frame components.
What infill can I use with the frame?
The frame is intended for compatible 3/4-inch or 1-inch profile infill. Depending on the complete design, that can include compatible aluminum profiles or another properly engineered infill material.
Is the aluminum non-combustible?
The 6063-T6 aluminum frame material is non-combustible. Complete Zone Zero, wildfire, pool-barrier, or other code compliance depends on the full assembly, placement, openings, hardware, and local requirements.
What should I measure before ordering?
Confirm the finished opening width and height, wall or post conditions, hinge side, latch or stop condition, swing clearance, grade, selected infill thickness, and the complete support plan before ordering.
Can the frame be used for a custom gate design?
Yes. The frame-only format is specifically useful when the builder wants to choose the infill pattern and finished appearance while starting from a coordinated aluminum gate structure.
Start with the 6×6 aluminum frame, then finish the gate around the project.
Choose the frame kit above or send Aluglobus the opening, infill idea, support condition, and hardware plan for help coordinating the complete gate-frame package.
Add frame kit to cart ↑ Request project support Aluglobus Aluminum Systems · DIY gate-frame kits · Factory-direct supply · Nationwide shipping