A clean flat-profile aluminum fence for modern residential and commercial projects.
The Alu Max Rail™ 1.5 Flat Profile 6′ × 6′ Fence Kit uses 1.5-inch-wide aluminum profile slats to create a simple, contemporary fence surface. The system is designed for people who want straight lines, durable exterior aluminum, a powder-coated finish, and lower maintenance than traditional painted or stained fencing.
Choose product options ↑ View specifications ↓ 1.5″ flat aluminum profile · minimalist fence design Panel size6 ft × 6 ft Profile1.5″ flat slat MaterialAluminum FinishPowder coated MaintenanceLow maintenanceMinimal profile width, straight geometry, and exterior aluminum performance.
The Max Rail™ 1.5 system is built for projects where clean proportion and simple repetition matter. Its narrower flat slats create a refined visual rhythm that works naturally with contemporary architecture.
6×6 fence format
A practical nominal section size for residential and commercial fence layouts.
1.5-inch flat profiles
The defining flat slat width creates a crisp, modern appearance across the fence panel.
Minimalist design
Straight lines and repeated narrow profiles complement modern homes, concrete, stucco, stone, and other clean exterior finishes.
Durable aluminum
Aluminum provides long-term exterior performance without the rust behavior associated with unprotected ferrous metals.
Rust & corrosion resistance
The aluminum system is well suited to outdoor fence applications and changing weather conditions.
Powder-coated finish
The factory-applied exterior finish protects the aluminum surface and provides long-term color and appearance.
Easy handling
Aluminum keeps the system manageable during site assembly compared with heavier material alternatives.
Low routine upkeep
No recurring painting or staining cycle is required. Routine cleaning is the primary appearance-maintenance task.
The visual advantage comes from proportion and repetition, not decorative complexity.
A 1.5-inch flat face produces a narrow, consistent architectural line. Repeated across a 6×6 fence section, the profile creates a refined rhythm that feels cleaner and more deliberate than bulky commodity fence infill.
Spacing and privacy: final slat spacing, opening size, and privacy level depend on the configured kit and project layout. Do not assume a universal gap or privacy percentage unless it is specified for the order. Conceptual 1.5″ flat-profile scaleA site-assembled 6×6 fence kit built around the Max Rail™ 1.5 flat-profile system.
The product provides the flat-profile fence components required for the configured section. Exact post, mounting, and accessory requirements depend on the full fence layout and installation condition.
Ordering note: confirm posts, bases, anchors, transitions, corners, gates, and other project-specific installation accessories before finalizing a multi-panel fence run. 01Max Rail™ 1.5 flat-profile aluminum slats
The primary fence infill profiles that create the narrow, straight architectural line.
02Matching frame or rail components
Fence-section components selected for the configured 6×6 Max Rail™ assembly.
03Required internal fence-section parts
System components used to organize, align, and retain the flat-profile fence assembly.
04Standard assembly hardware where applicable
Fastening components supplied with the selected kit configuration for efficient site assembly.
Modern appearance is only useful if the fence can stay outside and keep looking intentional.
The Max Rail™ 1.5 system is designed around aluminum, powder-coated exterior protection, manageable installation, and low recurring maintenance.
Outdoor-ready aluminum
Aluminum is naturally suited to exterior environments and does not develop iron-oxide rust.
Powder-coated surface
The exterior finish protects the metal surface and provides a consistent factory-finished appearance.
Weather resistance
The system is designed for residential and commercial outdoor fence use across changing conditions.
Low maintenance
No painting, staining, or special wood-style treatment cycle is required.
A clean flat-profile fence for homes, landscape design, remodels, and commercial exteriors.
The narrow Max Rail™ profile works especially well where the fence needs to feel architectural rather than ornamental.
Perimeter fencing
Create a straight, contemporary fence line around modern and renovated homes.
Property separations
Use the flat-profile system for clean front-yard, side-yard, and boundary sections.
Garden enclosures
The narrow aluminum profile pairs well with concrete, stone, planting, and minimalist landscape design.
Exterior screening
A modern aluminum direction for office, multifamily, hospitality, and light-commercial environments.
Wood-fence replacement
Use aluminum where the project needs a cleaner long-term alternative to recurring wood maintenance.
Fence + gate layouts
Carry the same Max Rail™ flat-profile language into compatible gate and fence combinations.
A strong choice when the project needs a refined profile, clean repetition, and low recurring maintenance.
The system is less about visual bulk and more about consistent architectural lines across the property.
| Planning factor | Max Rail™ 1.5 flat profile | Traditional wood fence direction |
|---|---|---|
| Visual language | Narrow, straight, repeated aluminum profiles for a modern architectural look. | Board-based appearance that can read warmer but usually requires more finish upkeep. |
| Exterior behavior | Aluminum does not rot and does not develop iron-oxide rust. | Wood can absorb moisture, check, warp, or decay depending on species and maintenance. |
| Finish care | Powder-coated surface with routine cleaning as the primary appearance maintenance. | May require recurring stain, sealer, paint, or board replacement. |
| Installation handling | Aluminum components are manageable for site assembly and coordinated kit installation. | Varies by lumber size, moisture content, and framing method. |
| Design coordination | Can be coordinated with compatible modern aluminum gate and exterior-system layouts. | Often requires separate fabrication details to match metal gates or other finishes. |
The clean flat-profile look depends on straight supports, consistent spacing, and careful alignment.
The kit is designed for efficient assembly, but the final result still depends on accurate fence layout, correct support conditions, and a controlled installation sequence.
Before installation: confirm the full fence run, support locations, finished height, grade changes, gates, mounting or footing requirements, and the exact kit configuration supplied for the project.Lay out the fence run
Mark panel locations, corners, ends, support positions, grade changes, and adjoining gate conditions.
Install the approved supports
Set or mount the supports plumb using the foundation, base, or anchoring condition required for the site.
Establish the 6×6 section frame
Build or position the supporting fence-section components square and level before installing the flat profiles.
Install the 1.5-inch profiles
Place the Max Rail™ slats in sequence while maintaining the spacing and orientation specified for the configured kit.
Secure the section hardware
Complete the applicable connections and verify that each component remains aligned and properly secured.
Inspect the finished fence line
Confirm plumb, top-line consistency, profile spacing, fasteners, and transitions before completing the installation.
The core details that define the Max Rail™ 1.5 Flat Profile 6×6 fence kit.
The product is a site-assembled aluminum fence kit centered on 1.5-inch flat profiles, a nominal 6×6 section, a powder-coated exterior finish, and low-maintenance outdoor use.
Specification boundary: do not assume a universal post size, wall thickness, slat gap, privacy percentage, footing depth, wind-load rating, or hardware quantity unless it is confirmed for the actual order.- Product
- Alu Max Rail™ 1.5 Flat Profile 6′ × 6′ Kit (Fence)
- Nominal panel size
- 6 ft × 6 ft
- Profile style
- 1.5″ flat aluminum profile
- System type
- Site-assembled aluminum fence kit
- Material
- Aluminum
- Finish
- Exterior powder-coated finish
- Exterior behavior
- Rust-resistant and corrosion-resistant aluminum direction
- Design style
- Modern / contemporary / minimalist
- Maintenance
- Low maintenance; no recurring painting or staining cycle
- Primary users
- Contractors, installers, builders, designers, and experienced DIY users
- Applications
- Residential, commercial, perimeter, landscape, remodel, and coordinated fence-and-gate projects
See more factory-direct aluminum system and fabrication context.
Explore additional Aluglobus aluminum products, manufacturing, and project-system details.
Plan the profile, outdoor use, installation, maintenance, and full fence layout before ordering.
The questions cover the four core product topics plus kit contents, posts, residential and commercial use, material choice, and coordination with gates or custom layouts.
What is the benefit of the flat profile design?
The 1.5-inch flat profile creates a sleek, modern look that complements contemporary homes, commercial buildings, and outdoor spaces.Is this fence suitable for outdoor environments?
Yes. The system uses rust-resistant aluminum with an exterior powder-coated finish designed for outdoor use. Routine cleaning is recommended, especially in coastal or high-debris environments.Is installation complicated?
The kit is designed for efficient site assembly and includes the fence components required for the configured section. Accurate layout, support installation, level alignment, and correct fastening are still important.Does the fence require maintenance?
Very little routine maintenance is needed. The aluminum system does not require painting, staining, or special wood-style treatments. Periodic cleaning and inspection of fasteners and supports are recommended.What size is the Max Rail 1.5 fence kit?
This product is a nominal 6-foot by 6-foot fence kit designed around 1.5-inch-wide flat aluminum profile slats.What is included with the kit?
The kit includes Max Rail 1.5 flat-profile aluminum fence components for one 6×6 section, matching frame or rail components for the configured kit, required internal section parts, and standard assembly hardware where applicable.Are posts included with every Max Rail 1.5 fence kit?
Post and mounting requirements depend on the project layout and support condition. Confirm the required posts, bases, anchors, and installation accessories for the actual fence run before ordering.Can the system be used for residential and commercial projects?
Yes. The 6×6 flat-profile system is suitable for modern residential perimeter fencing, side-yard and front-yard sections, landscape enclosures, and commercial exterior screening.How does aluminum compare with wood for this type of fence?
Aluminum does not rot or require the recurring painting, staining, and sealing cycle associated with many wood fences. It also provides a clean factory-finished appearance for modern exterior projects.Can the Max Rail 1.5 system be coordinated with gates or custom layouts?
Yes. The same flat-profile design can be coordinated with project-specific fence runs and compatible gate layouts. Confirm dimensions, support conditions, and component requirements before fabrication or installation.Use the 1.5-inch flat profile when the design calls for a cleaner, narrower architectural line.
Order the 6×6 Max Rail™ 1.5 fence kit, or send Aluglobus the complete layout when you need help coordinating sections, supports, gates, mounting conditions, or contractor supply.
Choose product options ↑Request project support Aluglobus Aluminum Systems · Max Rail™ flat-profile fence systems · Factory-direct supply · Nationwide shipping