Build the aluminum frame first. Choose the Plexiglass infill for the project.
The Alu Plexiglass 6×6 Fence Panel System is a modern aluminum frame and channel package designed to accept separately purchased Plexiglass inserts. The clean frame geometry creates a high-end contemporary fence direction while giving the project control over clear, frosted, tinted, or other compatible custom infill.
Choose product options ↑ View specifications ↓ Plexiglass not included Aluminum frame · insert channels · 6×6 system Panel size6 ft × 6 ft SystemAluminum + Plexiglass-ready InfillSold separately FinishMatte powder coated Price$721.00A 6×6 fence framework designed around clean lines, insert flexibility, and exterior aluminum durability.
The system gives homeowners, contractors, and designers a ready aluminum framework for a Plexiglass-style fence without forcing every project into one infill appearance.
6×6 panel format
A versatile panel size for residential and commercial fence layouts.
Plexiglass-ready channels
The frame is designed to receive compatible Plexiglass inserts after the infill is selected for the project.
Clean modern lines
Minimal aluminum framing creates a refined architectural look around the transparent, frosted, or tinted insert area.
Exterior aluminum structure
Aluminum provides corrosion resistance and long-term dimensional stability for outdoor fence use.
Matte powder-coated finish
The exterior finish protects the aluminum surface while creating a clean, low-maintenance appearance.
Custom infill direction
Choose the compatible Plexiglass appearance that best matches the required view, privacy, and design intent.
Installer-friendly assembly
The frame, channels, supports, hardware, and fasteners are organized for straightforward system assembly.
The kit supplies the aluminum fence structure and the components needed to prepare it for Plexiglass infill.
This product is for the fence framework. It gives the installer the structural aluminum package and insert interface while leaving the actual Plexiglass panel selection open.
PLEXIGLASS PANELS ARE NOT INCLUDED WITH THIS PRODUCT. 01Aluminum frame components
The structural frame pieces that create the 6×6 fence-panel perimeter and support layout.
02Plexiglass channel system
Channels designed to receive compatible Plexiglass inserts once the required infill has been selected.
03Support elements
Panel-support components that help stabilize the assembled fence system.
04Assembly hardware & fasteners
The fastening components needed to assemble the supplied aluminum fence system.
05Plexiglass infill
Not included. Order separately to the dimensions and finish required by the frame and project.
One aluminum frame can support very different visual outcomes depending on the infill you choose.
Clear, frosted, tinted, and custom Plexiglass directions can change the same 6×6 frame from view-preserving to more private. The selected insert must match the channel and frame dimensions required for the project.
Clear
Best when maintaining sightlines and a light, open appearance matters most.
Frosted
Diffuses direct visibility while keeping the fence visually lighter than an opaque panel.
Tinted
Adds a darker architectural appearance and can reduce visual exposure compared with clear infill.
Custom
Coordinate a compatible Plexiglass finish with the home, landscape, or commercial design direction.
The frame is designed to hold the infill cleanly instead of treating the Plexiglass as an afterthought.
The insert channels create controlled edges for the Plexiglass panels and help keep the infill aligned inside the aluminum fence framework. Support elements stabilize the assembled panel while the aluminum perimeter creates the visible architectural line.
Measure before ordering infill: Plexiglass dimensions and any required edge clearances should be taken from the actual frame and channel configuration. Do not order panels from the nominal 6×6 fence size alone. Conceptual Plexiglass channel interfaceExterior aluminum provides the durable foundation. The selected infill completes the fence.
The frame is designed for outdoor use with a powder-coated aluminum surface that resists corrosion and fading. Routine maintenance is primarily cleaning rather than painting or staining.
Rust & corrosion resistance
The aluminum structure is suited to exterior environments where steel would require additional rust protection.
UV-resistant finish direction
The coating is intended to help maintain the frame color during exterior sun exposure.
Weather-ready structure
The aluminum frame is designed for outdoor residential and commercial fence applications.
No painting or staining cycle
Routine care focuses on cleaning the powder-coated frame and maintaining the selected infill.
A flexible fence direction for homes, outdoor living areas, privacy layouts, and commercial projects.
The aluminum frame can be paired with different Plexiglass finishes so the final fence can prioritize views, light diffusion, privacy, or a stronger architectural statement.
Home perimeter fencing
Create a modern aluminum boundary with the infill finish selected to match the property.
Backyards & patios
Use clear or diffused infill to define outdoor spaces without relying on a traditional picket or solid-slat look.
Privacy-screen layouts
Frosted or darker compatible Plexiglass can increase visual separation while preserving a sleek frame design.
Pool-perimeter concepts
The system can be considered around pools when the complete barrier, supports, infill, gates, and hardware meet local safety requirements.
Commercial properties
A clean architectural fence direction for offices, hospitality areas, multifamily properties, and other exterior spaces.
Architectural projects
Use the Plexiglass-ready frame where transparency, light, or a modern infill treatment is central to the design.
Build the frame and supports accurately, then size the Plexiglass to the actual channel openings.
The product is designed for straightforward assembly, but clean results depend on support layout, frame alignment, accurate infill dimensions, and correct final fastening.
Project planning: confirm finished height, support/post conditions, mounting, grade, selected Plexiglass, local requirements, and the actual frame opening dimensions before ordering the infill.Confirm the fence layout
Measure the run and establish the location of the 6×6 panel, supports, corners, and any adjoining gates or panels.
Install the approved supports
Set or mount the supporting structure plumb using the method appropriate for the site and project requirements.
Assemble the aluminum frame
Connect the frame components, support elements, channels, and supplied hardware while maintaining square and level alignment.
Measure the finished channel openings
Use the assembled frame to confirm the actual Plexiglass insert dimensions rather than relying only on the nominal panel size.
Install the separately purchased infill
Fit the compatible Plexiglass panels into the channel system using the installation details appropriate for the selected infill.
Inspect & clean the completed panel
Verify alignment, support stability, fasteners, insert seating, and the overall finished fence line.
The core details that define the 6×6 Plexiglass-ready fence package.
The product supplies the aluminum fence framework and insert-support system while leaving the Plexiglass infill outside the kit.
Important: Plexiglass thickness, exact insert dimensions, support/post dimensions, footing depth, and structural load values are not universal specifications stated for this product. Confirm them for the actual project before fabrication or installation.- Product
- Alu Plexiglass Fence System 6×6 Fence Panel · No Plexiglass
- Panel size
- 6 ft × 6 ft
- System type
- Aluminum fence frame designed for Plexiglass inserts
- Included
- Frame components, insert channels, support elements, hardware, and fasteners
- Plexiglass
- Not included · purchased separately
- Compatible directions
- Clear, frosted, tinted, or compatible custom Plexiglass
- Frame material
- Exterior aluminum construction
- Finish
- Matte powder-coated exterior finish
- Weather behavior
- Rust-resistant, corrosion-resistant, and UV-resistant finish direction
- Maintenance
- No painting or staining cycle · periodic cleaning recommended
- Applications
- Residential, backyard, patio, pool-area, privacy-screen, commercial, and modern exterior projects
- Kit price
- $721.00
See more factory-direct aluminum system and fabrication context.
Explore Aluglobus manufacturing, product, and aluminum-system details before planning the project.
Understand what is included, choose the infill correctly, and plan the installation before ordering.
These questions cover the five core product topics plus sizing, kit contents, frame-only flexibility, maintenance, and pool-area planning.
Does this fence panel include plexiglass?
No. This product is the aluminum fence system only. The plexiglass panels are not included and must be purchased separately in the dimensions and finish required for the project.What type of plexiglass can be used with this system?
Clear, frosted, tinted, or custom plexiglass can be used when it matches the required dimensions of the frame and channel system. Confirm the insert dimensions before ordering the infill.Is the aluminum frame resistant to rust and weather?
Yes. The frame uses exterior aluminum with a powder-coated finish for corrosion and weather resistance. Routine cleaning is recommended, especially in coastal or high-debris environments.How difficult is the installation process?
The system is designed for straightforward assembly and includes the necessary frame hardware and fasteners. Professional installation is recommended for the best result, while experienced DIY installers can complete the assembly with proper layout, support installation, and standard tools.Where can this fence panel be used?
The 6×6 system can be used for residential and commercial projects, including backyards, patios, privacy-screen layouts, pool-area applications, and modern exterior designs when the complete installation satisfies local requirements.What size is the fence system?
The product is a 6-foot by 6-foot fence panel system designed around an aluminum frame and channels for separately purchased plexiglass infill.What is included in the kit?
The kit includes the aluminum frame components, the channel system for the plexiglass inserts, support elements that stabilize the panel, and the hardware and fasteners needed for assembly.Why is the plexiglass sold separately?
Selling the frame system separately lets the project choose the required infill appearance, such as clear, frosted, tinted, or another compatible custom plexiglass finish, instead of locking every installation into one panel style.Does the aluminum frame need painting or staining?
No. The powder-coated aluminum frame does not require the recurring painting or staining cycle associated with many wood fence systems. Occasional cleaning is the primary appearance-maintenance task.Can I use this around a pool?
It can be considered for pool-area fencing, but the complete barrier must meet local requirements for height, openings, climbability, gates, latches, supports, and the selected plexiglass infill. Do not assume compliance from the 6×6 panel size alone.Choose the aluminum framework, then finish the fence with the Plexiglass direction your project needs.
Order the 6×6 aluminum fence system without Plexiglass, or send Aluglobus the full layout when you need help coordinating panel quantities, supports, frame details, insert planning, or custom finish requirements.
Choose product options ↑Request project support Aluglobus Aluminum Systems · Plexiglass-ready aluminum fence systems · Factory-direct supply · Nationwide shipping