Aluglobus Aluminum Systems
(Fence Box) 2.75 2-way End Post Kit 8 ft
(Fence Box) 2.75 2-way End Post Kit 8 ft
An 8 ft 2.75 2-way post boxed with its press cap, 7 L-brackets, a bottom spacer with screws and a cover strip for the blank side, for the post where an aluminum slat fence run stops.
- Aluminum 6063-T6
- AAMA 2604 Super-Durable Powder Coating
- Black, Bronze, White
Coming soon — please confirm availability with us before ordering.
Couldn't load pickup availability
An 8 ft 2.75 2-way post boxed with its press cap, 7 L-brackets, a bottom spacer with screws and a cover strip for the blank side, for the post where an aluminum slat fence run stops.
What the aluminum fence end post kit does
The (Fence Box) 2.75 2-way End Post Kit 8 ft from Aluglobus Aluminum Systems is an aluminum fence end post kit for the point where a slat fence run stops: against a wall, beside a gate opening or at the end of a property line. It is built on the same 2.75 2-way post used along the rest of the run, boxed with the hardware to fix slats and rails on the working side and a cover strip to close off the side that has nothing attached.
The post is extruded from 6063-T6 aluminum and finished with AAMA 2604 super-durable powder coating. The price list marks the kit MADE IN USA and gives its usage as pedestrian gates, fence and wall topper.
What's in the box
| 2-way Post | 1pc |
|---|---|
| 2-way Post Press cap | 1pc |
| L-Brackets (for securing slats and rails) | 7pcs |
| 1" or 2" Spacer with screw bush (bottom spacer) | 1pc |
| #12×2" Self-Tapping screws, Black (for the bottom spacer) | 2pcs |
| Cover Strip, Black (post cover on the blank side) | 1 pc |
Compare that with the standard (Fence Box) 2.75 2-way Post Kit 8 ft, which is packed with 14 L-brackets, 4 bottom spacers and 8 screws and has no cover strip. The end kit carries 7 L-brackets, 1 bottom spacer and 2 screws, plus the cover strip, because only one side of the post holds slats.
End post or line post: which one you need
A 2.75 2-way post is designed to take slat panels on two opposite sides, which is exactly what you want in the middle of a run. At the end of a run, one of those sides is left empty. This kit gives that post a finished face by covering the blank side instead of leaving an open channel on show.
- End post kit: where a run finishes and only one side of the post carries slats.
- Standard 2-way post kit: for each post that has panels on both sides.
- Corners, hinge and latch posts: confirm the correct post with our team before ordering.
Note that the price list gives the end kit's usage as pedestrian gates, fence and wall topper, while the standard 2-way post kit also lists sliding gates. If your end post will sit next to a sliding gate, check the setup with us first.
Colors and availability
The 2.75 2-way end post is listed in Black, Bronze and White. In the kit inclusions, the cover strip and the #12×2" self-tapping screws are listed as Black for every color. If an exact color match on the blank side matters on a Bronze or White fence, ask our team before you order.
This kit belongs to the Oct / Nov Gen 3.0 Fence Box release, and some colors may be listed as coming soon. Confirm current stock for your color before you set an install date or book a crew.
Planning your fence run
Sketch the layout first. Mark where every run starts and stops, then count end posts and line posts separately so each position gets the right kit. Check your opening widths and post spacing against your slat length before ordering, and follow the included instructions and your local code for footings or surface mounting.
The kit does not include slats, slat spacers or mounting hardware. For slab or wall mounting, the 2.75 2-way post baseplate is sold separately. If you are starting from scratch, a complete Alu 40 8ft x 6ft 2-way post fence kit bundles slats, a post kit and spacers in one order, and you can add an end post kit for the last post of each run. Browse the full range of aluminum fence kits and parts to match slats and accessories to your end posts.
If you are unsure how many end posts your layout needs, send us a sketch with your run lengths and gate positions, and our team will help you check the parts list before you order.